TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 387 of 779

Remove

Note.

Do not tighten nuts (C) or instal l

1. Remove six bolts (A) and lock washers.

2. Remove two pipe plugs (B).

locking wire until oil pan is in position on engine.

3. Cut locking wire and remove four slotted nuts (C).

This allows adapter to aline with oil spill tube.

Install

2. Install two pipe plugs (B).

1. Install four slotted nuts (C).

3. Install six bolts (A) and lock washers.

Figure 6-92. Removing or installing pressure oil pump elbow adapter

and oil pickup screen assembly attaching parts (universal

vehicle application engines).

6-93