TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 396 of 779

Remove

1. Remove oil temperature transmitter (A).

2. Remove oil temperature switch (B).

3. Remove two reducer bushings (C).

4. Remove pipe plug (D).

5. Remove three pipe plugs (E).

Install

1. Install three pipe plugs (E).

2. Install pipe plug (D).

3. Install two reducer bushings (C).

4. Install oil temperature switch (B).

5. Install oil temperature transmitter (A).

Figure 6-106. Removing or installing damper

and oil filter housing switches, bushings,

and pipe plugs - front view.

Remove

1. Remove pipe plug (A).

2. Remove pipe plug (B) (if used on engine).

3. Remove three pipe plugs (C).

4. Remove pipe plug (D) (if used on engine).

5. Remove two pipe plugs (E).

6. Remove two pipe plugs (F).

7. Remove nipple (G) or elbow (whichever is used on

engine).

8. Remove bushing (H).

9. Remove pipe plug (J) (if used on engine).

Install

1. Install pipe plug(J) (if used on engine).

2. Install bushing (H).

3. Install nipple (G) or elbow (whichever is used on

engine).

4. Install two pipe plugs (F).

5. Install two pipe plugs (E).

6. Install pipe plug(D) (if used on engine).

7. Install three pipe plugs (C).

8. Install pipe plug(B) (if used on engine).

9. Install pipe plug (A).

Figure 6-107. Removing or installing damper

and oil filter housing pipe plugs - rear view.

6-102