TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 418 of 779

Remove

the need for replacement. Use an arbor press to

1. Separate vertical drive shaft (A) from housing

assembly.

remove dowel pins from housing.

2. Separate top clutch disc (B) from housing.

Note.

Do not remove the two dowel pins from

Install

housing unless inspection (para 6-40c) indicates

1. Position top clutch diae (B) in housing assembly.

2. Position vertical drive shaft (A) in housing.

Figure 6-146. Separating or positioning vertical drive shaft, top clutch

disc, and housing assembly (piston actuated clutch).

6-124