TM-9-2815-202-34
ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
FEBRUARY 1990
TM-9-2815-202-34 - Page 25 of 670
TM 9-2815-202-34
1-8.
LOCATION AND DESCRIPTION OF COMPONENTS
a. Water Pump.
Mounted on the front
engine cover and driven by a right camshaft gear.
It circulates coolant through the cylinder
block,
cylinder
heads, and oil cooler.
b. Governor.
Mounted on the front end of the
blower and driven by a blower rotor. It is used to
control the idle and maximum engine operating
speeds.
c. Oil Pan.
Mounted on the bottom of the
cylinder block. It provides a reservoir for engine oil.
d. Valve Rocker Covers.
Encloses the
valve and injector rocker arm mechanisms located
on top of cylinder heads.
e. Starter.
Mounted on left side of flywheel
housing. It is an electric starter and engages the
flywheel ring gear.
f. Flywheel.
Mounted on the rear of the
crankshaft. It is used to provide true alinement of
transmission flex plate.
g. Oil Cooler.
Mounted on lower right side of
engine block. It uses engine coolant to cool engine
and transmission oil.
Change 1
1-5
Back to Top
