TM-9-2815-202-34

ENGINE, DIESEL W/CONTAINER: MODEL 7083-7395, 7083-7396, 7083-7398 AND 7083-7399

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

FEBRUARY 1990

  TM-9-2815-202-34 - Page 26 of 670

TM 9-2815-202-34
1-8. LOCATION AND DESCRIPTION OF COMPONENTS (Cont)
h. Exhaust Manifolds.
Attached directly to
cylinder heads. They route exhaust gases through
attached exhaust piping to the turbocharger.
i.
Liquid Level Gage (Oil).
Mounted on the
lower left front cylinder block (models 7083-7395
and 7083-7398) or right rear oil pan (models
7083-7391, 7083-7396, and 7083-7399). It
measures the liquid level in the oil pan.
j. Thermostats and Housing Assembly.
Mounted on the front of the left cylinder head and
connected to the right cylinder head with crossover
tubes (models 7083-7395 and 7083-7398). They
control coolant temperature by restricting coolant
flow to the radiator.
k.
Fuel Strainer.
Mounted on the left front
corner of the cylinder block (models 7083-7395
and 7083-7398). It filters fuel to fuel pump.
l.
Fuel Filter.
Mounted on the right front
corner of the cylinder block (models 7083-7395
and 7083-7398). It filters fuel to fuel inlet manifold.
m. Water Manifolds.
Mounted on top of cylinder heads (models 7083-7391, 7083-7396, and
7083-7399). They collect coolant as it leaves the cylinder heads.
n. Crankshaft Vibration Damper.
Mounted on a hub on the front of the crankshaft (models
7083-7391, 7083-7396, and 7083-7399). It reduces torsional vibration in the crankshaft.
1-6
Change 1


Back to Top