TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 731 of 856
DISASSEMBLY
1.
Install three-leg mechanical puller (Figure 2, Item 17) on rear crankshaft gear (Figure 2, Item 16) using three
bolts (3/8-16), three flat washers (7/16), and three nuts (3/8-16) through holes in gear. Remove gear from
crankshaft. Remove puller from gear.
2.
Remove Woodruff key (Figure 2, Item 12) from rear of crankshaft.
3.
Remove three pipe plugs (Figure 2, Item 13) from crankshaft.
4.
If necessary, remove oil pump drive gear (Figure 2, Item 14) from front of crankshaft using gear puller.
Thread screw (Figure 2, Item 15) in crankshaft for puller screw to seat.
12
14
15
13
16
17
MAINT_394
Figure 2.
Crankshaft Disassembly.
END OF TASK
TM 9-2815-205-24
0097
0097-3
Back to Top
