TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 834 of 856
Table 1.
Repair Specifications List - Continued.
(1) POINT OF
MEASUREMENT
(2) NEW MINIMUM
INCHES (MM)
(3) NEW MAXMUM
INCHES (MM)
(4) WEAR LIMIT
INCHES (MM)
Thrust plate to thrust
washers
0.0025 (0.06)
0.0050 (0.13)
*
Rotor to air outlet side of
housing
0.0040 (0.10)
*
Rotor to air inlet side of
housing
0.0100 (0.25)
*
Rotor to front end plate
(turbocharged)
0.0100 (0.25)
*
Rotor to front end plate
(nonturbocharged)
0.0080 (0.20)
*
Rotor to rear end plate
(turbocharged)
0.0120 (0.30)
*
Rotor to rear end plate
(nonturbocharged)
0.0100 (0.25)
*
Rotor to rotor
(turbocharged)
0.0130 (0.33)
*
Rotor to rotor
(nonturbocharged)
0.0090 (0.23)
*
OIL PUMP
Lobe clearance (inner and
outer rotors)
0.0005 (0.01)
0.0110 (0.28)
*
Clearance (pump body to
side of inner and outer
rotor)
0.0010 (0.03)
0.0035 (0.09)
*
FUEL INJECTOR
Follower spring load at
1.028 inches (26.11 mm)
(length)
70 lb (31.75 kg)
*
Valve spring load at
0.4358 inches (11.07 mm)
(length)
41 lb (18.60 kg)
*
END OF WORK PACKAGE
TM 9-2815-205-24
0106
0106-10
Back to Top
