TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981
TM-9-2815-210-34-2-1

  TM-9-2815-210-34-2-1 - Page 145 of 259

TM 9-2815-210-34-2-1
FRAME 3
1.
2.
3.
4.
NOTE
Tag all tubes and wires so that they will be put back
in the same place.
Unscrew nut (1) and take out flame heater fuel pump-to-flame heater nozzle
tube (2).
Unscrew and take out elbow (3).
Unscrew nut (4) and take out flame heater wiring harness (5).
Take out two screws and lockwashers (6) and take out flame heater fuel
pump (7).
NOTE
Some engines with high profile water manifolds have
0.620-inch spacers under two clamps (8). These
should be taken out with fuel pump (7).
END OF TASK
3-97


Back to Top