TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

TM-9-2815-210-34-2-1 - Page 136 of 259

TM 9-2815-210-34-2-1

FRAME 5

CAUTION

1.

2.

3.

4.

Do not use open end wrench to take out pipe bushing

(1) or tube adapter (2).

Bushing and adapter might

be bent.

Use only tubing wrench or box wrench.

For type A flame heater assembly, unscrew and take out 90° elbow (3) and

pipe bushing (1).

Take out tubing adapter (2).

CAUTION

For type

adapters

Do not use open end wrench to take out tubing adapters

(4). Adapters might be bent. Use only tubing wrench

or box wrench.

B flame heater assemblies, unscrew and takeout two tubing

(4) .

Loosen locknut (5) and take out nozzle

Unscrew and takeout spark plug (7).

gasket (8).

END OF TASK

and check valve assembly (6).

Take out and throw away spark plug

3-88