TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

TM-9-2815-210-34-2-1 - Page 134 of 259

TM 9-2815-210-34-2-1

FRAME 3

1.

2.

3.

4.

5.

Unscrew and takeout sparkplug (1).

Take off and throw away spark plug

gasket (2).

CAUTION

Do not take out two adapters (3) using open end wrench.

Adapters may be bent.

Use only tubing wrench or box

wrench.

Unscrew and takeout two adapters (3).

Loosen locknut (4).

Unscrew and take out nozzle and check valve

assembly (5).

NOTE

On some engines, ignition coil (6) may be mounted on

top of engine instead of next to flame heater elbow as

shown.

Take off four nuts and lockwashers (7).

Take off intake manifold elbow (8)

and ignition coil (6) with two

C

lamps (9).

Take two clamps off ignition coil.

Take off and throw away intake manifold elbow gasket (10).

3-86