TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

TM-9-2815-210-34-2-1 - Page 132 of 259

TM 9-2815-210-34-2-1

c .

Engine LDS-465-1.

FRAME 1

1.

2.

3.

4.

NOTE

AH three types of intake manifold flame heater assemblies

have nozzle assembly, fuel inlet tube, fuel return tube,

spark plug, and ignition lead for spark plug. These

parts are in different positions on each type of flame

heater assembly but are taken out the same way except

where noted.

Type C flame heater assemblies may not have tube clamp (1).

Take out nut, lockwasher, and screw (2) and take off tube clamp (1).

Unscrew two nuts (3).

Take out and tag fuel inlet tube (4) and fuel return

tube (5).

Unscrew nut (6) and take off ignition lead (7).

NOTE

On some engines, ignition coil (8) may be mounted on top

of engine instead of next to flame heater assembly as

shown.

If ignition coil (8) is not mounted as shown, go

to frame 2.

Unscrew nut (9) and take ignition lead (7) off engine.

GO TO FRAME 2

3-84