TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

TM-9-2815-210-34-2-1 - Page 122 of 259

TM 9-2815-210-34-2-1

FRAME 5

1.

Unscrew and take out five tube tee fittings (1).

2.

Take out two screws and lockwashers (2) from each of six nozzle hold down

clamps (3).

3.

Take out six nozzle hold down clamps (3).

4.

Pull out six fuel injector nozzle and holder assemblies (4).

IF ANY NOZZLE AND HOLDER ASSEMBLY (4) CANNOT BE PULLED OUT,

GO TO FRAME 6.

IF ALL NOZZLE AND HOLDER ASSEMBLIES (4) CAN BE PULLED OUT,

GO TO FRAME 7

3-74