TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

TM-9-2815-210-34-2-1 - Page 123 of 259

TM 9-2815-210-34-2-1

FRAME 6

NOTE

Have machine shop make nozzle and holder remover (2).

See figure 3-2.

1.

Screw threaded end (1) of fabricated nozzle and holder remover (2) into end

of nozzle and holder assembly (3) as shown.

2.

Yank slide hammer (4) of nozzle and holder remover (2) back sharply and pull

out nozzle and holder assembly (3).

GO TO FRAME 7

3-75