TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

TM-9-2815-210-34-2-1 - Page 121 of 259

TM 9-2815-210-34-2-1

FRAME 4

1.

Unscrew 12 nuts (1).

Takeout and tag flame heater fuel return tube (2)

and fuel return-to-fuel injection pump tube (3).

CAUTION

Do not turn tube tee fittings (4 and 6) more than 45°

or fuel return tubes will break.

2.

Turn tube tee fitting (4) 45° to the left as shown, and take out fuel return

tube (5).

3.

Do step 2 again for five tube tee fittings (6) and four fuel return tubes (7),

working from rear to front of engine.

GO TO FRAME 5

3-73