TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

TM-9-2815-210-34-2-1 - Page 128 of 259

TM 9-2815-210-34-2-1

3-20. INTAKE MANIFOLD FLAME HEATER AND

NOTE

Intake manifold flame heater

ELBOW.

and elbow on engine

LDT-465-1C were taken out when turbocharger

was taken out.

Refer to para 3-5.

a.

Engines LD-465-1 and LD-465-1C.

FRAME 1

1.

2.

3.

4.

Unscrew

Unscrew

NOTE

This task is shown for engine LD-465-1C. This task is

the same for engine LD-465-1.

nut (1).

Take off and tag ignition lead (2).

and take out spark plug (3).

Take off and throw away spark plug

gasket (4).

CAUTION

Do not take out two adapters (8) using open end wrench.

Adapters may be bent.

Use only a tubing wrench or box

wrench.

Take out two nuts (5).

Take off and tag fuel inlet tube (6) and fuel return

tube (7).

Take out two adapters (8).

Loosen nut (9).

Take out nozzle and valve assembly (10).

GO TO FRAME 2

3-80