TM-9-2815-210-34-2-1
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2
APRIL 1981
TM-9-2815-210-34-2-1 - Page 124 of 259
TM 9-2815-210-34-2-1
NOTES:
1. ALL DIMENSIONS GIVEN ARE IN INCHES
2. MATERIAL: CARBON STEEL SAE 1065 THRU 1095
QUENCH AND TEMPER ROCKWELL
“C” 30-40
3. CUT THREADS USING 1/2-20 UNF-2A DIE
4. CUT THREADS TO 1.500 IN.
5. CUT THREADS USING 1/2 -27 NPT DIE
Figure 3-2.
Nozzle and Holder Remover Fabrication Instructions
3-76
Back to Top
