TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

  TM-9-2815-210-34-2-1 - Page 139 of 259

TM 9-2815-210-34-2-1
FRAME 2
1.
Unscrew
2.
Unscrew
NOTE
There are two types of top mounted-covered flame
heater fuel pump and ignition units. Type A and type
B assemblies have the same parts and are taken out in
the same way.
nut (1).
Take out and tag ignition lead (2).
nut (3).
Take off and tag flame heater harness (4).
3.
Take off two spring clamps (5) and take out ignition unit (6).
GO TO FRAME 3
3-91


Back to Top