TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

  TM-9-2815-210-34-2-1 - Page 143 of 259

TM 9-2815-210-34-2-1
d. Top Mounted-Uncovered Flame Heater Ignition Unit and Fuel Pump.
FRAME 1
NOTE
Tag all leads so that they are put back in the same
place.
1.
Unscrew nut (1) and take out flame heater ignition lead (2).
2.
Unscrew nut (3) and take off flame heater harness (4).
3.
Take out screw and lockwasher (5) and take off flame heater harness ground
lead (6).
4.
Take out screw and lockwasher (7) and take out ignition unit (8).
NOTE
Some engines with high profile water manifolds have
0.620-inch
thick
spacers
under
two
clamps
(9).
These
should be taken out with ignition unit (8).
5.
Take off two clamps (9).
GO TO FRAME 2
3-95


Back to Top