TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981

  TM-9-2815-210-34-2-1 - Page 35 of 259

TM 9-2815-210-34-2-1
FRAME 2
Soldier A
Soldier B
1.
Takeout 38 screws (l), nuts (2), and lockwashers (3).
2.
Hook lifting sling (4) to four shipping container lifting brackets
(5), and hook chain hoist (6) to lifting sling as shown.
3.
Work chain hoist to lift shipping container upper section (7) from
shipping container lower section (8).
4.
Work chain hoist to set shipping container upper section (7) aside.
CAUTION
Be careful not to damage rubber seal (9). It will be
used again when engine is put back in shipping con-
tainer after engine overhaul.
GO TO FRAME 3
2-3


Back to Top