TM-9-2815-210-34-2-1
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2
APRIL 1981
TM-9-2815-210-34-2-1 - Page 41 of 259
TM 9-2815-210-34-2-1
2-4. DRAINING OF ENGINE COOLANT, OIL, AND FUEL.
NOTE
Engine should be drained while it is hanging
from lifting sling, before mounting on main-
tenance stand.
a.
Draining Engine Coolant.
FRAME 1
NOTE
Engine may have already been drained before packing
in shipping and storage container.
1.
Place container below coolant drain cock (1).
Open drain cock and let coolant
drain out.
Close drain cock when coolant stops draining.
2.
Put coolant in approved disposal area.
END OF TASK
2-9
Back to Top
