TM-9-2815-210-34-2-1
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2
APRIL 1981
TM-9-2815-210-34-2-1 - Page 50 of 259
TM 9-2815-210-34-2-1
3-3. STARTER ASSEMBLY.
a .
Engines LD-465-1, LD-465-1C, and LDT-465-1C.
FRAME 1
Soldier
A
1.
Take off three nuts (1) and lockwashers (2).
WARNING
Starter assembly (3) weighs fifty pounds. Be careful
to hold it up firmly when taking it off mounting studs.
Starter could fall and cause injury to personnel and
damage to equipment.
Soldiers
2.
Hold starter (3) up and pull it straight out from engine until
A and B
starter drive gear is free.
Soldier
A
3.
Take off starter adapter (4) and adapter gasket (5). Throw
away starter adapter gasket.
Take off and throw away starter
gasket (6).
END OF TASK
3-2
Back to Top
