TM-9-2815-210-34-2-1
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2
APRIL 1981
TM-9-2815-210-34-2-1 - Page 54 of 259
TM 9-2815-210-34-2-1
b .
Engines LD-465-1, LDS-465-1, and LDS-465-1A.
FRAME 1
1.
Take out screw (1), lockwasher (2), and stepped washer (3).
2.
Pull bracket (4) up and away from generator (5).
NOTE
Some engines do not have ground strap (6).
3.
Take out fillister-head screw and washer (7) and take off ground strap (6).
NOTE
Some engines do not have two cotter pins (8).
4.
Pull out and throw away two cotter pins (8).
5.
Loosen but do not take out two screws (9).
CAUTION
Hold up generator (5) when drive belts (10) are taken off
so that it does not swing down and hit mounting bracket.
Mounting bracket could be damaged.
6.
Push generator (5) toward engine. Take off and tag two generator drive
belts (10).
GO TO FRAME 2
3-6
Back to Top
