TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981
TM-9-2815-210-34-2-1

  TM-9-2815-210-34-2-1 - Page 59 of 259

TM 9-2815-210-34-2-1
FRAME 2
1.
2.
3.
4.
5.
6.
Unscrew ignition lead connector (1). Take off and tag ignition lead (2).
Unscrew two uppercuts (3). Take off and tag flame heater fuel inlet tube
(4) and flame heater fuel return tube (5).
Loosen hose clamp (6).
NOTE
Some engines do not have flame heater cover (7).
Take out four screws and starwashers (8) and take off flame heater cover (7).
Loosen two screws (9).
Take off four nuts and lockwashers (10), lift up bracket (11) and take off
flame heater intake manifold elbow (12).
GO TO FRAME 3
3-11


Back to Top