TM-9-2815-210-34-2-1
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2
APRIL 1981
TM-9-2815-210-34-2-1 - Page 64 of 259
TM 9-2815-210-34-2-1
FRAME 2
1.
Loosen lower hose clamp (1).
2.
Loosen two hose clamps (2) and slide oil drain hose (3) all the way
up on oil drain tube (4).
3.
Take out two screws and lockwashers (5).
Soldier A 4.
Hold up turbocharger (6) so it does not fall when locknuts (7) and
screws (8) are taken off.
Soldier B 5.
Take off four locknuts (7) and two screws (8).
Soldier A 6.
Take out turbocharger (6).
7.
Take off and throw away two gaskets (9).
NOTE
Hose (10) should stay on engine.
8.
Tighten hose clamp (1).
GO TO FRAME 3
3-16
Back to Top
