TM-9-2815-210-34-2-1
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2
APRIL 1981
TM-9-2815-210-34-2-1 - Page 69 of 259
TM 9-2815-210-34-2-1
FRAME 3
1.
Unscrew nut (1).
2.
Unscrew nut (2) and take out oil inlet tube (3).
CAUTION
Plug or tape over oil inlet tube opening on engine to
keep out dirt. Dirt can damage parts inside engine.
3.
Take out two screws and lockwashers (4) and take off oil inlet
adapter (5). Take off oil inlet adapter gasket (6) and throw it
away.
Soldier A 4.
Hold up turbocharger (7) so it does not fall when locknuts (8) and
screws (9) are taken off.
Soldier B 5.
Take out four locknuts (8) and two screws (9).
Soldier A 6.
Take out turbocharger (7).
Take off and throw away turbocharger
gasket (10).
CAUTION
Plug or tape over all air and oil openings on turbo-
charger (7) to keep out dirt. Dirt can damage parts
inside turbocharger.
GO TO FRAME 4
3-21
Back to Top
