TM-9-2815-210-34-2-1

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 1 OF 2

APRIL 1981
TM-9-2815-210-34-2-1

  TM-9-2815-210-34-2-1 - Page 49 of 259

TM 9-2815-210-34-2-1
CHAPTER 3
ENGINE DISASSEMBLY
Section I. SCOPE
3-1. EQUIPMENT ITEMS COVERED .
This chapter gives instructions for taking apart
the engine assembly.
3-2. EQUIPMENT ITEMS NOT COVERED.
All equipment items are covered in this
chapter.
Section II.
REMOVAL OF ENGINE ACCESSORIES
NOTE
This procedure is the same for all engines
except where noted.
TOOLS:
Air compressor pulley adjusting wrench, pn 10935288
SUPPLIES:
Tags
Container
Cap and plug set
Cloth-backed adhesive tape, MIL-T-43566
Hexhead machine screw, 3/8 x 1 1/2-inches
Capscrew, 3/8 x 3/4 inch (2)
PERSONNEL: Two
EQUIPMENT CONDITION:
Engine mounted on transport stand.
3-1


Back to Top