TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 178 of 968

TM 9-2815-210-34-2-2

FRAME-1

1.

2.

IF

IF

Check if pump (1) uses threaded cap (2) to hold in pressure relief valve

spring (3) and plunger (4).

If pump uses a threaded cap, this is early

model pump.

Check if pump (1) uses retaining pin (5) and either washer (6) or one of two

types of spring retainer (7) to hold in pressure relief valve spring (3) and

plunger (4).

If pump uses retaining pin and washer or spring retainer,

this is late model pump.

WORKING ON EARLY MODEL PUMP, GO TO FRAME 3.

WORKING ON LATE MODEL PUMP, GO TO FRAME 4

4-159