TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 193 of 968

TM 9-2815-210-34-2-2

FRAME 14

1.

2.

3.

4.

5.

6.

Measure

Measure

Measure

Measure

Measure

Measure

NOTE

Readings must be within limits given in table 4-34. The

letter L shows a loose fit. If readings are not within

given limits, get a new oil pump.

inside diameter of driven impeller bushing (1).

outside diameter of driven impeller shaft (2).

fit of driven impeller shaft (2) in driven impeller bushing (1).

depth of pressure pump driven impeller bore (3).

length A of pressure pump driven impeller (4).

clearance between pressure pump driven impeller

pressure pump drive impeller bore (3).

-

GO TO FRAME 15

(4) and top of

4-174