TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

  TM-9-2815-210-34-2-2 - Page 496 of 968

TM 9-2815-210-34-2-2
FRAME
2
1.
2.
3.
Check that pulley (1) is not cracked or broken. Check that keyway in pulley
is not worn. If keyway is worn or if pulley is damaged, get a new one.
WARNING
Dry cleaning solvent is flammable. Do not use near an
open flame. Keep a fire extinguisher nearby when sol-
vent is used. Use only in well-ventilated places.
Failure to do this may result in injury to personnel and
damage to equipment.
Check that belt surface of pulley (1) is not worn and has no nicks, burrs or
other damage.
Fix small nicks and burrs with a fine mill file or crocus cloth
dipped in dry cleaning solvent.
If more repair is needed or if belt surface is
worn, get a new pulley.
Check that woodruff kev (2) is not worn and has no burrs. Fix small burrs
with a fine mill file. If more repair is needed or if woodruff key is worn, get
a new woodruff key.
END OF TASK
4-477


Back to Top