TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 498 of 968

TM 9-2815-210-34-2-2

4-51. ENGINE FAN.

a. Cleaning. There are no special cleaning procedures needed. Refer to

cleaning procedures given in para 4-3.

b .

Inspection and Repair.

FRAME 1

If working on fans with

frame 1.

If working on fans with

1.

Check that fan (1) has no nicks,

NOTE

aluminum blades, do

steel blades, go to frame 2.

cracks or any other damage. Take out minor

nicks with a fine mill file.

If more repair is needed, get a new fan.

2.

Check that four bolts (2) have no damaged threads or other damage. If bolts

are damaged, get new ones.

3.

Check that four lockwashers (3) are not cracked or damaged in any way. If

lockwashers are damaged, get new ones.

4.

Check that 30 rivets (4) are not loose or damaged. If rivets are loose or

damaged, get a new fan (1).

END OF TASK

4-479