TM 9-2815-210-34-2-2
c. Inspection and Repair.
FRAME 1
1.
2.
3.
4.
GO
Check that mounting bracket (1) and adjusting strap (2) are not cracked or
broken.
Check that mounting bracket and adjusting strap do not have
out-of-round bolt holes. If either part is damaged, get a new one.
Check that mating surfaces of mounting bracket (1) and adjusting strap (2)
have no nicks or burrs. Fix small nicks or burrs with a fine mill file. If
more repair is needed, get a new part.
Check that mating surface of mounting bracket (1) is flat. If it is not flat,
get a new mounting bracket.
Check that adjusting strap (2) is flat. If it is bent, straighten it. If adjusting
strap cannot be made flat, get a new one.
TO FRAME 2
4-476