TM 9-2815-220-24
CRANKSHAFT REPLACE/REPAIR
0139 00
INSTALLATION (Continued)
12. Torque-tighten tie-rod (1) slotted nuts (4).
a. With the aid of a helper holding slotted nuts (4) on the opposite side of crankcase, torque-
tighten 14 slotted nuts (4) on tie-rods (1) to 53 foot pounds (72 N
•
m).
b. Apply additional torque to align slotted nut with hole in tie-rod if required.
c. Install 14 new cotter pins (3) (item 521, WP 0175) to secure slotted nuts (4).
1
4
3
END OF WORK PACKAGE
WP 0139 00-23 (24 blank)