TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

  TM-9-2815-220-24 - Page 1178 of 1563

TM 9-2815-220-24
CRANKSHAFT REPLACE/REPAIR
0139 00
INSTALLATION
NOTE
The crankshaft may be installed with all 12 connecting rods in place
on the crankshaft.
See Work Package 0143 for connecting rod
installation instructions.
CAUTION
If the crankshaft is going to be installed with the rods in place, make
sure 12 crankcase protectors are installed to protect the crankcase.
Main bearing halves (used or new) must be inspected according to
WP 0138 (Crankshaft Main Bearing Inspection) prior to installation.
1. Install main bearing halves (21) after completing Work Package 0138.
a. Install upper main bearing halves (21) in accordance with their respective location marks.
b. Make sure the main thrust bearing half goes in number 4 main journal.
c. Coat upper main bearing halves (21) with lubricant (item 21, WP 0173).
21 (seven places)
WP 0139 00-16


Back to Top