FUEL INJECTION PUMP TIMING CHECK
TIMING CHECK (Continued)
4. Check camshaft bevel gear timing marks.
a. With timing marks aligned and the marked tooth visible in the fuel injection pump, the
scribed tooth (A) on the right and left bank cam beveled gears (8 and 9) should be
approximately in the 12 o’clock position.
b. If the timing marks are in the 12 o'clock position, timing is good.
Go to Installation.
c. If the timing marks are not in the 12 o’clock position, the fuel injection pump must be
Go to WP 0115 (Fuel Injection Pump Replacement) for timing procedure.
WP 0036 00-4