TM 9-2815-220-24
INDUCTION LEAK TEST
0037 00
THIS WORK PACKAGE COVERS:
Before Test, Test, and After Test
INITIAL SETUP:
Tools:
General mechanic’s tool kit (item 121, WP 0176)
Regulator assembly (item 97, WP 0176)
Fabricated Items:
Turbosupercharger covers (2) (item 10, WP 0177)
Personnel Required:
Track Vehicle Repairer (1) 63H10
Equipment Conditions:
Engine level on flat surface
BEFORE TEST
CAUTION
Left and right banks must be tested separately and engine front and
rear vents must be open.
NOTE
Procedure is the same for each bank of the engine.
1. Remove pipe plug (1) from damper housing (2) to vent the front of the engine.
2
1
WP 0037 00-1