TM 9-2815-220-24
GENERATOR (650 AMPERE) DRIVE GEAR TEST
0039 00
THIS WORK PACKAGE COVERS:
Test
INITIAL SETUP:
Tools:
General mechanic’s tool kit (item 121, WP 0176)
Generator coupling tool (item 58, WP 0176)
Generator holding fixture (item 59, WP 0176)
Torque wrench, 0-600 foot-pounds (item 128,
WP 0176)
Engine (flywheel) turning tool (for Models 2CA
and 2DA): splined wrench (item 136,
WP 0176)
Expendable and Durable Items:
Lubriplate (item 23, WP 0173)
Mandatory Replacement Parts:
Gasket (2) (item 353, WP 0175)
Lock washer (5) (item 98, WP 0175)
Self-locking nut (item 35, WP 0175)
Personnel Requirements:
Track Vehicle Repairer (2) 63H10
Equipment Conditions:
Generator removed (WP 0051)
GENERATOR DRIVE GEAR TEST
NOTE
The drive gear test is to be performed when generator output is
questionable and whenever the generator is replaced (WP 0051).
Refer to WP 0021 (Generator Abnormal Operation).
There are two methods of testing the drive gear: the first one is with
the gear installed on the engine, the other is a bench test.
Use the
method that best suits your situation.
Generator drive gear assembly
WP 0039 00-1