WP 0044 00-11
TEST SCHEDULE (Continued)
Net Observed Torque
Governor high idle check at no load
and dynamometer water off
Adjust as necessary.
adjustment is necessary, re-check
engine power (torque) as in run
Check and adjust as necessary
auxiliary drive governor speed at no
load and dynamometer water off
* Full Rack-Full Load
13. Acceleration check.
Accelerate to full throttle, no load (2600-2660 rpm), with a moderate steady throttle
Return to low idle (675-725 rpm) with the same type throttle movement.
It is permissible for engine rpm to go below 675 rpm briefly at return
to idle providing the governor responds and returns the engine rpm to
the low idle setting.
14. Check flame heater system for operation.
Activate while idling and feel for warm intake elbow.
Visually look for fuel leaks.
15. Check smoke generating system operation.
Run engine at 2000 rpm.
Activate smoke generating system.
Verify that engine produces white smoke.