TM 9-2815-220-24
ENGINE RUN-IN
0044 00
WP 0044 00-12
AFTER RUN-IN
NOTE
If the engine will be used within 30 days, cap or plug all openings.
If
the engine will be stored longer than 30 days, preserve as directed in
WP 0032.
If a dynamometer is not available, the engine may be installed in a
vehicle and the vehicle driven at equally increasing speed increments
from 0 to maximum speed in 15-minute intervals over the first 3 hours
of operation.
The engine may then be considered run-in.
END OF WORK PACKAGE