TM 9-2815-220-24
DUST EJECTOR SYSTEM REPLACEMENT
0083 00
INSTALLATION
1. Install left bank ejector tube (1).
a. Slide connector hose (32) over engine oil
breather tube (3), then position two hose
clamps (2) loosely on connector hose.
b. Slide connector hose (33) over scavenge
port of ejector tube (1), then position two
hose clamps (7) loosely on connector
hose.
c. Place tube (1) with new gasket (10)
(item 265, WP 0175) in position and
secure using six new self-locking nuts (9)
(item 161, WP 0175).
3
9 (six places)
4, 5, 6
2
1
d. Install loop clamp (4) and secure using
screw (5) and new self-locking nut (6)
(item 38, WP 0175).
9
6
10
7
7
33
8
2
5
4
3
2
32
1
WP 0083 00-9