TM 9-2815-220-24
FUEL/WATER SEPARATOR AUTOMATIC DRAIN SYSTEM AND
WIRING HARNESS REPLACEMENT
0084 00
REMOVAL (Continued)
CAUTION
Do not attempt to remove probes from control module.
They are
permanently affixed, removal will destroy the module.
9. Remove two water level probes (11, 12).
a. Remove screw (13), with lock washer (14) and flat washer (15) to remove cushioned
clamp (16).
Discard lock washer.
b. Loosen, but do not remove remaining mounting screws (13, 17).
c. Pull fuel water separator (4) away from mounting bracket (18).
d. Mark probes for location, then remove two water level probes (11, 12) from fuel water
separator (4).
10. Remove water separator (4).
a. Remove mounting screws (13, 17) to remove separator.
18
12
11
16
14
4
17
4
13
17
13
15
WP 0084 00-4