TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

  TM-9-2815-220-24 - Page 686 of 1563

TM 9-2815-220-24
FUEL/WATER SEPARATOR AUTOMATIC DRAIN SYSTEM AND
WIRING HARNESS REPLACEMENT
0084 00
INSTALLATION (Continued)
5. Install drain elbow (10) and hose (9).
NOTE
Fuel out fitting is a tee on engines equipped with a smoke generating
system.
On engines without a smoke generating system the fuel out
fitting is a 90-degree elbow.
The tee fitting configuration is
illustrated.
6. Install tee fitting (8).
7. Install hose (7) (fuel out to fuel injection pump).
8. Install hose (6) (fuel out to smoke system).
9. Install inlet elbow (5).
10. Install hose (3) (fuel into water separator).
11. Bleed air from filter and fuel lines by opening bleeder valve (2) and running electric fuel pump
(see appropriate vehicle operators manual) until fuel runs out of bleeder valve (2).
3
END OF WORK PACKAGE
7
9
8
6
5
10
4
WP 0084 00-10


Back to Top