TM 9-2815-220-24
FUEL/WATER SEPARATOR REPAIR/FILTER ELEMENT REPLACEMENT
0085 00
DISASSEM
B
LY
1. Remove eight screws (20), with lock washers (21), and flat washers (22), to remove
cover (23) and gasket (24).
Discard lock washers and gasket.
2. Remove two outer elements (25) and inner element (26).
It may be necessary to turn elements
while removing to get them out easily.
Discard elements.
3. Remove bleeder valve (2) from cover (23).
20
21
22
23
24
25
2
4
26
25
WARNING
CLEANING
1. See Work Package 0028 for General Cleaning Procedures.
2. Clean all metal parts, fittings, hose ends, separator, bleeder valve, cover and inner element (26)
with cleaning solvent (item 8, WP 0173).
Remove sludge and gum with scraper or stiff brush.
INSPECTION
All parts must be inspected with care.
Replace parts if damage or wear exceeds allowable
limits.
1. See Work Package 0028 for General Inspection Procedures.
2. Check bleeder valve (2) and mounting port in cover (23) to be sure that there is no blockage.
WP 0085 00-5