TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 694 of 1563

TM 9-2815-220-24

FUEL/WATER SEPARATOR REPAIR/FILTER ELEMENT REPLACEMENT

0085 00

INSTALLATION (Continued)

3. Install drain elbow (10) and hose (9).

NOTE

Fuel out fitting is a tee on engines equipped with a smoke generating

system.

On engines without a smoke generating system the fuel out

fitting is a 90-degree elbow.

The tee fitting configuration is

illustrated.

4. Install tee fitting (8).

5. Install hose (7) (fuel out to fuel injection pump).

6. Install hose (6) (fuel out to smoke system).

7. Install inlet elbow (5).

8. Install hose (3) (fuel into water separator).

9. Bleed air from filter and fuel lines by opening bleeder valve (2) and running electric fuel pump

(see appropriate vehicle operators manual) until fuel runs out of bleeder valve (2).

3

END OF WORK PACKAGE

7

9

8

6

5

10

4

WP 0085 00-8