TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 693 of 1563

TM 9-2815-220-24

FUEL/WATER SEPARATOR REPAIR/FILTER ELEMENT REPLACEMENT

0085 00

INSTALLATION

1. Install water separator (4).

a. Place separator in position and loosely secure using three mounting screws (13, 17) with

flat washers (15) and new lock washers (14) (item 93, WP 0175), leaving space between

water separator (4) and mounting bracket (18).

CAUTION

Probes must be installed in proper separator ports.

Probe with lead

attached to side of control module must be installed in upper

separator port.

Failure to comply will result in improper functioning

of fuel/water separator.

2. Install two water level probes (11, 12).

a. Install two water level probes (11, 12) in fuel water separator (4).

b. Install screw (13), new lock washer (14) (item 93, WP 0175), flat washer (15), and

cushioned clamp (16).

c. Tighten remaining mounting screws (13, 17).

18

12

11

16

14

17

17

4

4

13

Control

Module

Lower

Probe

Upper

Probe

13

15

WP 0085 00-7