TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 903 of 1563

TM 9-2815-220-24

POWER TAKEOFF DRIVE SHAFT REPLACE/REPAIR (2DR)

0112 00

THIS WORK PACKAGE COVERS:

Disassembly, Assembly

INITIAL SETUP:

Tools and Special Tools:

General mechanic’s tool kit (item 121, WP 0176)

Torque wrench, 0-175-foot pounds (item 127,

WP 0176)

Expendable and Durable Items:

Locking wire (item 43, WP 0173)

Personnel Requirements:

Track Vehicle Repairer (1) 63H10

Equipment Conditions:

Engine removed from vehicle and placed on a

flat stationary surface

PTO/Fuel Pump Drive Housing Removed

(WP 0111)

NOTE

This work package describes how

to remove the PTO drive shaft

with the damper housing not

removed.

The cap screws that

fasten the PTO drive shaft also

secure the damper.

The damper

will remain in position with these

cap screws removed.

The

procedure is the same whether the

damper housing is removed or not

- only the equipment conditions

change.

WP 0112 00-1