TM-9-2815-220-24

AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AVDS-1790 2CA, 2DA and 2DR Air-Cooled 12-Cylinder Diesel Engines

TM-9-2815-220-24 - Page 911 of 1563

TM 9-2815-220-24

FUEL INJECTION TUBES REPLACEMENT

0113 00

INSTALLATION (Continued)

5. Install lower fairlead half (28) between tube assembly and double-angle bracket (29) (see

detail B).

CAUTION

When bending injection tubes is required, be careful not to nick

tubing.

The bending tools are designed to allow bending without

nicks.

6. Assure that fairlead half (28) is aligned with bracket (29) holes and align tube to fit within

1/8 inch (3.175 mm) in any direction with fairlead half.

Use two bending tools (24) (item 13,

WP 0177).

7. Install upper fairlead half (28) on top of fuel injection tube (see detail B).

a. Apply a small amount of Lubriplate (item 23, WP 0173) to threads of two screws (25).

b. Install retainer (30), using screws (25) and new self-locking nuts (27) (item 38, WP 0175),

onto double-angle bracket (29).

c. Tighten two screws (25) to 160-180 inch-pounds (18-20 N

•

m).

29

29

24

24

27

28

25

30

B

WP 0113 00-7