TM 9-2815-220-24
POWER TAKEOFF DRIVE SHAFT REPLACE/REPAIR (2DR)
0112 00
REMOVAL
3
4
2
1
1. Remove PTO drive shaft (1).
a. Remove lock wire (2) securing six
screws (3).
b. Remove six screws (3) fastening PTO
drive shaft (1) and damper (4) to
crankshaft.
CLEANING
1. See Work Package 0028 for Standard
Cleaning Procedures.
INSPECTION
All parts must be inspected with care.
Replace parts if damage or wear exceeds allowable
limits.
1. See Work Package 0028 for Standard Inspection Procedures.
3
4
2
1
INSTALLATION
1. Install PTO drive shaft (1).
a. Place drive shaft (1) in position.
b. Secure with six screws (3).
c. Torque-tighten screws (3) to
80-85 foot-pounds (110-116 N
•
m) using
torque wrench (item 127, WP 0176).
d. Secure six (3) screws using lock wire (4).
END OF WORK PACKAGE
WP 0112 00-2