TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 190 of 554

TM 9-2815-224-34&P

Valve Mechanism Maintenance Instructions (Cont)

7-6. CAM FOLLOWER/PUSH ROD REMOVAL/lNSTALLATlON (CONT).

a. Removal.

NOTE

Tag cam follower and associated parts so they may be installed in original

location.

This procedure shows removal of one cam follower. Remove other cam

followers in same way.

(1)

Set cylinder head (1) on side on 1 in. (25 mm) wooden blocks

(2)

Remove two screws (2) and lockwashers (3) from cam

(3)

Remove cam follower guide (4) from cylinder head (1).

follower guide (4).

(4)

Remove cam follower (5) and push rod assembly (6),

(5)

Remove cam follower (5) from push rod assembly (6).

as a unit, from cylinder head (1).

(6)

Remove locknut (7), spring (8), and lower spring seat (9), and push rod (10).

7-12