TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 194 of 554

TM 9-2815-224-34&P

Valve Mechanism Maintenance Instructions (Cont)

7-7. CAM FOLLOWER REPAIR (CONT).

c. Assembly.

NOTE

Apply lubricating oil to all parts before assembly.

(1)

Install roller (1) in cam follower body (2).

(2)

Install pin (3) through cam follower body (2) and roller (l).

(3)

Check side clearance between cam follower body (2) and

roller (1) using feeler gage. Clearance must be between 0.011

and 0.023 in. (0.28 and 0.58 mm).

(4)

Check pin-to-bushing clearance using dial indicator. Clearance must be less than 0.010 in.

(0.25 mm).

f. Follow-on Maintenance.

None.

END OF TASK

7-8. EXHAUST VALVE BRIDGE REMOVAL/iNSTALLATION.

This task covers:

a. Removal

c. Follow-on Maintenance

b. Installation

INITIAL SETUP

Models

References

All

None

Test Equipment

Equipment Condition

None

TM or Para

Condition Description

Special Tools

Para 7-5

Rocker arms removed.

Gage, feeler FB310B

Special Environmental Conditions

Supplies

None

Oil, lubricating, Item 48, Appendix C

Tags identification, Item 61, Appendix C

General Safety Instructions

None

Personnel Required

MOS 63W, Wheel vehicle repairer

Level of Maintenance

Direct Support

7-16