TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 279 of 554

TM 9-2815-224-34&P

Engine Brake Retarder Maintenance Instructions (Cont)

11-4.

ENGINE BRAKE WIRE HARNESS REMOVAL/INSTALLATION.

This task covers:

a. Removal

b. Installation

c. Follow-on Maintenance

INITIAL SETUP

Models

All

Test Equipment

None

Special Tools

None

Supplies

Connector, electrical butt, Item 34,

Appendix C

Tags, identification, Item 61, Appendix C

References

None

Equipment Condition

TM or Para

Condition Description

TM 9-2320-279-20 Batteries disconnected.

TM 9-2320-279-20 Rocker covers removed.

Special Environmental Conditions

None

General

Safety

Instructions

None

Personnel Required

MOS 63W, Wheel vehicle repairer

Level of Maintenance

Direct Support

a.

Removal.

NOTE

There are two models of engine brake wire harnesses. Model A has a wire extending

through the cylinder head and uses a butt connector to connect to the engine

harness. Model B has a spade (push-on) type connector. The following procedure

covers both models.

Engine brake wire harness is removed from left and right cylinder heads the same

way.

Tag and mark wires before removal.

(1)

Cut wire (1) for Model A. Disconnect wire (1) for Model B.

Change 2

11-11